Menampilkan semua 2 hasil
-
PLANET ICS-2400T Industrial 4-Port RS232/RS422/RS485 Serial Device Server
Rp6.314.790Quick ViewSerial Interface Serial Ports 4 x DB9 male Serial Standards RS232/RS422/4-wire RS485/2-wire RS485 Baud Rate (Data Rate) 50bps to 921Kbps Data Bits 5, 6, 7, 8 Parity Type 1, 1.5, 2 Stop Bit Odd, Even, None, Space, Mark Flow Control RTS/CTS and DTR/DSR (RS232 only)
XON/XOFFSignals RS232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS422: Tx+, Tx-, Rx+, Rx-, GND
4-wire RS485: Tx+, Tx-, Rx+, Rx-, GND
2-wire RS485: Data A (+), Data B (-), GNDPin Assignment Pin RS232 RS422
RS485-4WRS485-2W 1 DCD TxD+ — 2 RxD TxD- — 3 TxD RxD- Data- 4 DTR RxD+ Data+ 5 GND GND GND 6 DSR — — 7 RTS — — 8 CTS — — 9 — — — Serial Line Protection 2KV isolation protection
1.5KV (level 2) surge protection
15KV ESD protectionEthernet Interface Ethernet Ports 2 x RJ45 Standard 10/100BASE-TX Distance 100m Switch Architecture Store-and-Forward Address Table 1K ESD Protection 6KV Surge Protection 2KV Hardware Installation DIN-rail kit and wall-mount ear Enclosure IP40 metal Dimensions (W x D x H) 50 x 87 x 135 mm Weight 625 g LED Indicators System: Power 1, Power 2, Fault, I/O
TP Port: Link/Active
Serial Port: Tx and RxPower Requirements 12~48V DC, redundant power with polarity reverse protection function Power Consumption Full Loading
12VDC: 0.419A (5.1 watts)
24VDC: 0.227A (5.4 watts)
48VDC: 0.136A (6.5 watts)Connector Removable 6-pin terminal block for power input
Pin 1/2 for Power 1, Pin 3/4 for fault alarm, Pin 5/6 for Power 2DI and DO 2 Digital Input (DI):
Level 0: -24V~2.1V (±0.1V)
Level 1: 2.1V~24V (±0.1V)
Input Load to 24V DC, 10mA max.2 Digital Output (DO):
Open collector to 24V DC, 100mA max.Alarm Provides one relay output for power failure
Alarm relay current carry ability: 1A @ DC 24VReset Button < 5 sec: System reboot
> 5 sec: Factory defaultManagement Management Interfaces Web management
Telnet Console management
Windows-based VCOM Utility management
PLANET Smart Discovery UtilityIP Version IPv4 and IPv6 Operation Mode TCP Server
TCP Client
UDP Client
Virtual COM
RFC2217
Telnet Server
Pair Connection – Remote (Slave)
Pair Connection – Local (Master)Virtual COM Utility Platform Supports Windows Base Only:
Windows XP
Windows Server 2003
Windows 7
Windows Server 2008
Windows 8 (Must install the latest version of WinPcap)
Windows Server 2012 (Must install the latest version of WinPcap)
Windows 10Alert Built-in buzzer and RTC Security Allow max. 4 accessible IP address hosts/ranges SNMP MIBs RFC1213 MIB-II
RFC1317 RS232-like MIBStandards Conformances Regulatory Compliance FCC Part 15 Class A,
CE Certification Class AStability Testing IEC60068-2-32 (Free fall)
IEC60068-2-27 (Shock)
IEC60068-2-6 (Vibration)Standards IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3x flow control and back pressure
RFC 768 UDP
RFC 793 TFTP
RFC 791 IP
RFC 792 ICMP
RFC 854 Telnet
RFC 958 NTP
RFC 1591 DNS (client only)
RFC 1908 SNMPv2c
RFC 2068 HTTP
RFC 2131 DHCP Client
RFC 2732 Format for Literal IPv6 Addresses in URL’s
RFC 3315 DHCPv6 Client
RFC 3513 IPv6 Addressing Architecture
RFC 3596 DNSv6
RFC 4443 ICMPv6
EIA/TIA RS232/422/485Regulatory Approval RoHS Environment Operating Temperature -40 ~ 75 degrees C Storage Temperature -40 ~ 85 degrees C Humidity 5 ~ 95% (non-condensing) -
PLANET ICS 2100 Industrial RS-232/ RS-422/ RS-485 over Ethernet Media Converter
Rp964.000Quick View• Serial Interface
–One RS-232 port and one RS-422/485 port to 10/100Base-TX Media Conversion
–Cost effective solutions of RS-232/ RS-422/ RS-485 for Ethernet applications
–Supports RS-232 with DB9 interface, 4-wire RS-422 or 2-wire RS-485 with terminal block operation
–Asynchronous serial data rates up to 230400bps• Ethernet Interface
–Complies with IEEE 802.3, IEEE 802.3u 10/100Base-TX standard
–Supports auto MDI/MDI-X function on RJ-45 Port for ICS-2100• Smart Functions
–Standard TCP/IP interface and versatile operation modes
–Software Protocol supports ARP, ICMP,TCP/IP, UDP, HTTP server, DHCP client, Telnet
server/client
–Built-in IP-based Web interface for remote management
–Serial Operation mode selected via Web management
–Pair Connection mode for connecting two serial devices over a network
–PLANET Smart Discovery utility automatically finds the client devices on the network
–Firmware upgrade via HTTP protocol• Hardware
–LED indicators for easy network diagnostics
–Reset Button on the front panel for resetting to factory default• Industrial Case / Installation
–IP30 metal case protection
–DIN rail and wall mount design
–12 to 48V DC, redundant power with polarity reverse protect function and connective removable terminal block for master and slave power
–Supports EFT protection 6000 V DC for power line
–Supports 6000 V DC Ethernet ESD protection
–-10 to 60 degrees C operating temperature



