The AWK-1137C is an ideal client solution for industrial wireless mobile applications. It enables WLAN connections for both Ethernet and serial devices, and is compliant with industrial standards and approvals covering operating temperature, power input voltage, surge, ESD, and vibration. The AWK-1137C can operate on either the 2.4 or 5 GHz bands, and is backwards-compatible with existing 802.11a\/b\/g deployments to future-proof your wireless investments.<\/p>\n
<\/p>\n
WLAN Standards
\n802.11a\/b\/g\/n
\n802.11i Wireless Security<\/p>\n
Modulation Type
\nDSSS
\nOFDM
\nMIMO-OFDM<\/p>\n
Frequency Band for US (20 MHz operating channels)
\n2.412 to 2.462 GHz (11 channels)
\n5.180 to 5.240 GHz (4 channels)
\n5.260 to 5.320 GHz (4 channels) DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service.
\n5.500 to 5.700 GHz (11 channels) DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service.
\n5.745 to 5.825 GHz (5 channels)<\/p>\n
Frequency Band for EU (20 MHz operating channels)
\n2.412 to 2.472 GHz (13 channels)
\n5.180 to 5.240 GHz (4 channels)
\n5.260 to 5.320 GHz (4 channels) DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service.
\n5.500 to 5.700 GHz (11 channels) DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service.<\/p>\n
Frequency Band for JP (20 MHz operating channels)
\n2.412 to 2.484 GHz (14 channels)
\n5.180 to 5.240 GHz (4 channels)
\n5.260 to 5.320 GHz (4 channels) DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service.
\n5.500 to 5.700 GHz (11 channels) DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service.<\/p>\n
Wireless Security
\nWEP encryption (64-bit and 128-bit)
\nWPA\/WPA2-Enterprise (IEEE 802.1X\/RADIUS, TKIP, AES)
\nWPA\/WPA2-Personal<\/p>\n
Transmission Rate
\n802.11b: 1 to 11 Mbps
\n802.11a\/g: 6 to 54 Mbps
\n802.11n: 6.5 to 300 Mbps<\/p>\n
Transmitter Power for 802.11a
\n23\u00b11.5 dBm @ 6 to 24 Mbps
\n21\u00b11.5 dBm @ 36 Mbps
\n20\u00b11.5 dBm @ 48 Mbps
\n18\u00b11.5 dBm @ 54 Mbps<\/p>\n
Transmitter Power for 802.11n (5 GHz)
\n23\u00b11.5 dBm @ MCS0\/8 20 MHz
\n18\u00b11.5 dBm @ MCS7\/15 20 MHz
\n23\u00b11.5 dBm @ MCS0\/8 40 MHz
\n18\u00b11.5 dBm @ MCS7\/15 40 MHz<\/p>\n
Transmitter Power for 802.11b
\n26\u00b11.5 dBm @ 1 Mbps
\n26\u00b11.5 dBm @ 2 Mbps
\n26\u00b11.5 dBm @ 5.5 Mbps
\n25\u00b11.5 dBm @ 11 Mbps<\/p>\n
Transmitter Power for 802.11g
\n23\u00b11.5 dBm @ 6 to 24 Mbps
\n22\u00b11.5 dBm @ 36 Mbps
\n20\u00b11.5 dBm @ 48 Mbps
\n19\u00b11.5 dBm @ 54 Mbps<\/p>\n
Transmitter Power for 802.11n (2.4 GHz)
\n23\u00b11.5 dBm @ MCS0\/8 20 MHz
\n17\u00b11.5 dBm @ MCS7\/15 20 MHz
\n23\u00b11.5 dBm @ MCS0\/8 40 MHz
\n17\u00b11.5 dBm @ MCS7\/15 40 MHz<\/p>\n
Transmitter Power
\nTransmitter Power
\nRead more<\/p>\n
Receiver Sensitivity for 802.11a (measured at 5.680 GHz)
\nTyp. -90 @ 6 Mbps
\nTyp. -88 @ 9 Mbps
\nTyp. -87 @ 12 Mbps
\nTyp. -85 @ 18 Mbps
\nTyp. -81 @ 24 Mbps
\nTyp. -78 @ 36 Mbps
\nTyp. -74 @ 48 Mbps
\nTyp. -73 @ 54 Mbps
\nNote Due to a limitation in the receiver sensitivity performance for channels 153 and 161, it is recommended to avoid using these channels in your critical applications.<\/p>\n
Receiver Sensitivity for 802.11n (5 GHz; measured at 5.680 GHz)
\nTyp. -69 dBm @ MCS7 20 MHz
\nTyp. -70 dBm @ MCS15 20 MHz
\nTyp. -64 dBm @ MCS7 40 MHz
\nTyp. -66 dBm @ MCS15 40 MHz
\nNote Due to a limitation in the receiver sensitivity performance for channels 153 and 161, it is recommended to avoid using these channels in your critical applications.<\/p>\n
Receiver Sensitivity for 802.11b (measured at 2.437 GHz)
\nTyp. -89 dBm @ 1 Mbps
\nTyp. -89 dBm @ 2 Mbps
\nTyp. -89 dBm @ 5.5 Mbps
\nTyp. -88 dBm @ 11 Mbps<\/p>\n
Receiver Sensitivity for 802.11g (measured at 2.437 GHz)
\nTyp. -88 dBm @ 6 Mbps
\nTyp. -88 dBm @ 9 Mbps
\nTyp. -88 dBm @ 12 Mbps
\nTyp. -87 dBm @ 18 Mbps
\nTyp. -84 dBm @ 24 Mbps
\nTyp. -81 dBm @ 36 Mbps
\nTyp. -77 dBm @ 48 Mbps
\nTyp. -75 dBm @ 54 Mbps<\/p>\n
Receiver Sensitivity for 802.11n (2.4 GHz; measured at 2.437 GHz)
\nTyp. -70 dBm @ MCS7 20 MHz
\nTyp. -70 dBm @ MCS15 20 MHz
\nTyp. -64 dBm @ MCS7 40 MHz
\nTyp. -65 dBm @ MCS15 40 MHz<\/p>\n
WLAN Operation Mode
\nClient, Client-Router, Slave, Sniffer<\/p>\n
Antenna
\nExternal, 2\/2 dBi, Omni-directional<\/p>\n
Antenna Connectors
\n2 RP-SMA female<\/p>\n
Ethernet Interface
\n10\/100BaseT(X) Ports (RJ45 connector)
\n2<\/p>\n
Standards
\nIEEE 802.3 for 10BaseT
\nIEEE 802.3u for 100BaseT(X)
\nIEEE 802.1Q for VLAN Tagging<\/p>\n
Ethernet Software Features
\nManagement
\nDHCP Server\/Client, HTTP, IPv4, LLDP, SMTP, SNMPv1\/v2c\/v3, Syslog, TCP\/IP, Telnet, UDP, Proxy ARP, VLAN, Wireless Search Utility, MXview, MXconfig<\/p>\n
Routing
\nPort forwarding, Static Route, NAT<\/p>\n
Security
\nHTTPS\/SSL, RADIUS, SSH<\/p>\n
Time Management
\nNTP Client, SNTP Client<\/p>\n
Firewall
\nFilter
\nICMP, MAC address, IP protocol, Port-based<\/p>\n
Serial Interface
\nConnector
\nDB9 male<\/p>\n
Serial Standards
\nRS-232, RS-422\/485, RS-232\/422\/485<\/p>\n
Operation Modes
\nDisabled, Real COM, RFC2217, TCP Client, TCP Server, UDP<\/p>\n
Data Bits
\n5, 6, 7, 8<\/p>\n
Stop Bits
\n1, 1.5, 2<\/p>\n
Parity
\nNone, Even, Odd, Space, Mark<\/p>\n
Flow Control
\nNone, RTS\/CTS, XON\/XOFF<\/p>\n
Baudrate
\n75 bps to 921.6 kbps<\/p>\n
Serial Data Log
\n256 KB<\/p>\n
Serial Signals
\nRS-232
\nTxD, RxD, RTS, CTS, DCD, GND, DTR, DSR<\/p>\n
RS-422
\nTx+, Tx-, Rx+, Rx-, GND<\/p>\n
RS-485-2w
\nData+, Data-, GND<\/p>\n
RS-485-4w
\nTx+, Tx-, Rx+, Rx-, GND<\/p>\n
LED Interface
\nLED Indicators
\nSYS, LAN1, LAN2, WLAN, Serial<\/p>\n
Input\/Output Interface
\nButtons
\nReset button<\/p>\n
Physical Characteristics
\nHousing
\nMetal<\/p>\n
IP Rating
\nIP30<\/p>\n
Installation
\nDIN-rail mounting, Wall mounting (with optional kit)<\/p>\n
Power Parameters
\nInput Voltage
\n9 to 30 VDC<\/p>\n
Power Connector
\n1 removable 3-contact terminal block(s)<\/p>\n
Power Consumption
\n11.7 W (max.)<\/p>\n
Reverse Polarity Protection
\nSupported<\/p>\n
Environmental Limits
\nOperating Temperature
\nStandard Models: 0 to 60\u00b0C (32 to 140\u00b0F)
\nWide Temp. Models: -40 to 75\u00b0C (-40 to 167\u00b0F)<\/p>\n
Storage Temperature (package included)
\n-40 to 85\u00b0C (-40 to 185\u00b0F)<\/p>\n
Ambient Relative Humidity
\n5 to 95% (non-condensing)<\/p>\n
Standards and Certifications
\nEMC
\nEN 61000-6-2\/-6-4, EN 55032\/24<\/p>\n
EMI
\nCISPR 22, FCC Part 15B Class A<\/p>\n
EMS
\nIEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
\nIEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V\/m
\nIEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV
\nIEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV
\nIEC 61000-4-6 CS: 10 V
\nIEC 61000-4-8 PFMF<\/p>\n
Radio
\nEN 300 328, EN 301 489-1\/17, EN 301 893, FCC ID SLE-1137C, ANATEL, MIC, NCC, SRRC, WPC, KC, RCM<\/p>\n
Road Vehicles
\nE mark E1<\/p>\n
Safety
\nEN 60950-1, UL 60950-1<\/p>\n
Vibration
\nIEC 60068-2-6<\/p>\n
MTBF
\nTime
\n1,125,942 hrs<\/p>\n
Standards
\nTelcordia SR332<\/p>\n","protected":false},"excerpt":{"rendered":"