{"id":27187,"date":"2020-07-15T14:57:37","date_gmt":"2020-07-15T07:57:37","guid":{"rendered":"https:\/\/unilead-asia.com\/?post_type=product&p=27187"},"modified":"2024-09-27T02:17:43","modified_gmt":"2024-09-26T19:17:43","slug":"poe-e201-power-over-gigabit-ethernet-extender","status":"publish","type":"product","link":"https:\/\/unilead-asia.com\/index.php\/product\/poe-e201-power-over-gigabit-ethernet-extender\/","title":{"rendered":"PLANET POE-E201 Power over Gigabit Ethernet Extender"},"content":{"rendered":"

Introduction<\/h3>\n

PLANET POE-E201 is a newly-designed simple extender which extends both the Gigabit Ethernet Data and IEEE 802.3at\/802.3af Power over Ethernet transmission distance over the standard 100m (328 ft.) Cat. 5\/5e\/6 UTP cable to 200m, 300m, 400m and the maximum 500m. <\/p>\n

No matter how many PoE supported networking devices such as PoE IP cameras, PoE wireless access points and PoE IP phones are deployed, they are easily installed without the need of having an additional electrical outlet. However, limited by the UTP cabling, only up to 100 meters (328 ft.) of cable is used. Thus, the POE-E201 is designed as the extender to transmit both Gigabit Ethernet data and high power PoE power over another distance of 100m. By daisy-chaining multiple POE-E201s, distance can be tripled or quadrupled to meet your requirements<\/p>\n

 <\/p>\n

Highlights<\/h3>\n

Interfaces
\nLAN IN\t1 x 10\/100\/1000Base-T Ethernet with IEEE 802.3at \/ 802.3af PoE \u201cData + DC\u201d in auto MDI\/MDI-X, auto-negotiation RJ-45 connector
\nLAN OUT\t1 x 10\/100\/1000Base-T Ethernet with IEEE 802.3at \/ 802.3af PoE \u201cData + DC\u201d out auto MDI\/MDI-X, auto-negotiation RJ-45 connector
\nPower over Ethernet
\nPoE Standard\tIEEE 802.3af Power over Ethernet
\nIEEE 802.3at Power over Ethernet Plus
\nPoE Power Supply Type\tMid-span\/Type B
\nPoE Power Output\t52V DC, 510mA, max. 26 watts
\nPower Pin Assignment\t4\/5(+), 7\/8(-)
\nMaximum Distance\t500m with daisy-chain installation
\nHardware Specifications
\nData Rate\t10\/100\/1000Mbps
\nSwitch Architecture\tStore-and-Forward
\nSwitch Throughput\t10Mbps:14880pps@64Bytes
\n100Mbps:148810pps@64Bytes
\n1000Mbps:1488000pps@64Bytes
\nMaximum Frame Size\t1552Bytes
\nFlow Control\tBack pressure for half duplex
\nIEEE 802.3x pause frame for full duplex
\nLED Indicators\t\u3000\u3000\u25a0 1 x PoE IN (Green)
\n\u3000\u3000\u25a0 1 x LAN Data (Green)
\n\u3000\u3000\u25a0 1 x PoE OUT (Green)
\nProtection\tESD (Ethernet): 2KV
\nSurge (EFT for power) : 2KV
\nPower Requirements\tIEEE 802.3at compliant with voltage within 52V-56V DC
\nPower Consumption\t3.2 watts (system maximum)
\nEnclosure & Installation\tMetal & wall mounting
\nNetwork Cable\t10Base-T: 4-Pair UTP Cat. 5 up to 100m (328ft)
\n100Base-TX: 4-Pair UTP Cat. 5 up to 100m (328ft)
\n1000Base-T: 4-Pair UTP Cat. 5e, 6, up to 100m (328ft)
\nEIA\/TIA- 568 100-ohm STP (100m, 328ft)
\nStandards Conformance
\nRegulatory Compliance\tFCC Part 15 Class A, CE
\nStandard Compliance\tIEEE 802.3 10Base-T Ethernet
\nIEEE 802.3u 100Base-TX Fast Ethernet
\nIEEE 802.3ab 1000Base-T Gigabit Ethernet
\nIEEE 802.3af Power over Ethernet
\nIEEE 802.3at Power over Ethernet
\nIEEE 802.3x Flow Control
\nEnvironment
\nOperating\tTemperature: 0 ~ 50 degrees C
\nRelative Humidity: 0 ~ 95% (non-condensing)
\nStorage\tTemperature: -10 ~ 85 degrees C
\nRelative Humidity: 5 ~ 95% (non-condensing)
\nOrdering Information
\nPOE-E201
\nIEEE 802.3at Power over Gigabit Ethernet Extender
\nAccessories
\nRKE-DIN-C
\nDIN-rail Mounting Kit<\/p>\n","protected":false},"excerpt":{"rendered":"