ISON IS-DG510P Series (8PoE/PoE+)

ISON IS-DG510P Series (8PoE/PoE+)

Rp11.814.871

  • Provide 8 Gigabit RJ45 Copper ports plus 2 100 / 1000 Based SFP(SX/LX/LHX) ports
  • Support up to 8 PoE port, IEEE 802.3af/at PoE, 15.4/30 Watt output, Full Load
  • Support up to 2 Ultra High Power PoE port, 60 Watt output Configurable
  • Support Smart PoE management function, PoE On/Off, Scheduling.
  • Support 9K Jumbo frames
  • Layer 2 Line-Speed Switching Fabric, non-blocking
  • Layer 4 ACL (Access Control List), QCL (QoS Control List), Port Control
  • Network redundancy LACP, Spanning Tree Protocol, STP, RSTP, MSTP
  • Support I.A. Ring, I.A. Chain (Network Load Balancing), 250pcs@20ms
  • Support BLP (Bad Link Protection) of I.A. Ring
  • Support Ring Coupling, Multiple Ring, Dual Homing
Qty:
Compare
SKU: IS-DG510P Kategori: Tag: , ,

Deskripsi

The IS-DG510P Series full Gigabit managed 10-port Ethernet switch with up to 8 PoE IEEE 802.3af/at PoE ports provide easy to use plug-n-play applications; a full Gigabit network provides higher throughput than legacy (10/100Mbs) Fast Ethernet networks. The cost effective IS-DG510P Series managed switches can provide power and data directly through a single Ethernet cable, ideal for factory production lines or can even be embedded into machine systems. The IS-DG510P Series managed switches are especially good for building automation, CCTV, ITS and security/safety related applications.

Ethernet
Operating Mode Store and Forward, L2 wire-speed/non-blocking switching engine
MAC addresses 8K
Packet Buffer 4 Mbits
Jumbo frame 9K
Switching Fabric / Back Plane 20Gbps

 

RJ45 Copper ports
Speed 10/100/1000 Mbps
MDI/MDIX Auto-crossover Support straight or cross wired cables
Auto-negotiation/Duplex 10/100/1000 Mbps speed auto-negotiation; Full & Half Duplex
Ethernet Port Protection 1.5KV VRMS 1minute(Hipot), 2KV surge immunity on RJ45 Copper ports
PoE IEEE 802.3af/at (15.4/30 Watt), PoE/PoE+, 60 Watt Ultra high power PoE

 

 

Fiber Ports
Port Types supported 100/1000 Base SFP Slot
Filter port connector LC/RJ45 connector for fiber ports
Optimal fiber cable Typical 50 or 62.5/125 μm for multimode (mm)
Typical 8 or 9/125 μm for single mode (sm)

 

Protocols & Standards
IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x, IEEE 802.1D/w/s, IEEE 802.1Q/p, IEEE 802.1ab, IEEE 802.1X, IEEE 802.3ad LLDP, IPv4/IPv6, SNMP v1/v2c/v3, DHCP, BootP, TFTP, ARP, RARP, Telnet, Syslog, Flow Control, Back Pressure, ICMP, UDP, TCP

 

Network Redundancy
I.A. Ring / I.A. Chain Recovery time < 20ms@250pcs
Network Topology Optimize Functions Ring Coupling, Multiple-Ring, Dual-Homing
Spanning Tree Protocol IEEE 802.1D/1w/1s, STP/RSTP/MSTP
Port Trunk / LACP Static Trunk or LACP (Link Aggregation Control Protocol)

 

Bridge, VLANs, Protocols
Flow Control IEEE 802.3x (Full Duplex) and Back-Pressure (Half Duplex)
Max VLANs 256
VLAN Types Port-Based VLAN, Private VLAN, MAC-Based VLAN
IEEE 802.1Q tag-based VLAN, IP Subnet-Based VLAN, Voice VLAN
IEEE 802.1ad Double Tagging (QinQ), Protocol-Based VLAN, VCL
Multicast protocols IGMP v1, v2, V3, up to 255 multicast groups
IGMP snooping, querying, MLD Snooping, GVRP
Immediate leave and leave proxy, Throttling and filtering
LLDP IEEE 802.1ab LLDP / LLDP-MED

 

Traffic management & QoS
Priority IEEE 802.1p QoS, Ingress / Egress, QCL
Number of queues per port 8
Scheduling schemes SPQ, WRR, SPQ+WRR
Traffic Shaper Port-based shaping

 

Security
Port Security IP and MAC-based Access Control/Filter, Auth User / Privilege Level Control
IEEE 802.1X Authentication Network Access Control / RADIUS / TACACS+ Server
Storm Control Multicast / Broadcast / Flooding Storm Control / Port Access Control / Limiters

 

Management
User Management Interfaces Cisco-Like CLI (Command Line Interface)
Web-based Management, Windows Utility for quick startup
SNMP V1, V2c, V3 USM, RMON, Trap / Inform / Retry, Telnet (5 sessions)
Management Security HTTPs, SSH, Access Management, Loop Protection
RADIUS Client for Management
Upgrade & Restore TFTP for Configuration Import / Export
TFTP for Firmware Upgrade
Diagnostic Syslog, Level Info / Warning / Error, Detailed Syslog
Port Mirror, Per VLAN mirroring, CPU Load Monitor, Traffic Counter
VeriPHY Ethernet Cable Diagnostics, ICMP Ping
PoE Smart PoE management
MIBs RFC 1757RMON 1, 2, 3, 9; RFC 2674 Q-Bridge MIB
RFC 1213 MIB II; RFC 1493 Bridge MIB; RFC 2233 IF MIB
DHCP Client Mode, Server Mode, Relay Mode, Snooping
NTP/SNTP YES
System Status Device info/status; Ethernet port status
Green Ethernet Port Power Savings
Layer 4 Security Access Control List

 

Power
Power Input Redundant Power Input, Removable Terminal Block
Input Voltage Range 46-57 VDC
Reverse power protection YES
Transient protection >15, 000 Watts peak
Power Consumption 17 Watt (Without PD Load)
PSE: 8 x 30Watt, total power budget, 240 Watt

 

Indicators
Power status indication Power Input status
Ethernet port indication Link & speed

 

Environmental and Compliances
Operating Temperature -40~75ºC (Cold startup at -40ºC)
Storage Temperature -40~85ºC
Humidity 5~95% (Non-Condensing)
Vibration, shock, free fall IEC-60068-2-6, -27, -32
Certification Compliance CE, FCC
Electrical safety CE, UL 60950-1, CSA C22.2 No. 60950-1, EN 60950-1, EN 50121-4
Hazardous Location UL/cUL Class I Division 2 Groups A/B/C/D
Transportation NEMA TS1/TS2
EMC FCC Part 15, CISPR 22 (EN55022) Class A
IEC-61000-4-2, -3, -4, -5, -6 (Level 3)
RoHS & WEEE RoHS (Pb free) and WEEE Compliant
MTBF >25 years

 

Mechanical
Protection IP30
Dimension 154mm x 105mm x 108mm(LxWxD)
Weight 1.5 kg
Installation Din-Rail Mount, Wall mount
Relay Output 1A, 24V, Normal Open

Informasi Tambahan

Berat 1,7 kg
Dimensi 10 × 5 × 5 cm

Ulasan

Belum ada ulasan.

Jadilah yang pertama memberikan ulasan “ISON IS-DG510P Series (8PoE/PoE+)”

Alamat email Anda tidak akan dipublikasikan. Ruas yang wajib ditandai *

Anda mungkin juga suka…

X